
 |
TAC12L
Computer machined from a solid bar of Aluminum,
the TAC12L is designed for use with 1” tactical rail system
clamps or as a super-bright LED flashlight. Its three Luxeon
III Star LEDs produces a blistering 240 Lumens of brilliant
white light equivalent to over 120 regular LEDs. Specialized
optics produce a spot beam with incredible beam throw that
cuts through fog and smoke with minimal backscatter.
Dual-action momentary tail switch eliminates cable switches
that can tangle or fail; simply mount on fore stock and
slide your hand forward slightly to lightly press on the
tail for momentary use or twist-on for constant use. Four
CR123 Lithium batteries provide 12 Watts of power to the
TAC12L's three Luxeon III Star LEDs. O-ring seals make this
light waterproof (not for scuba use).
- Lamp: 3 Luxeon III Star LEDs
- Lamp Life: 10,000+ hours
- Batteries: 4 CR123 3V Lithium
- Power: 240 Lumens
- Materials: Anodized Aluminum
and LEXAN®
- Individually serial numbered
- U.S. Patent #6,168,28
|
 |
TAC4L
Computer machined from a solid bar of Aluminum,
the TAC4L is designed for use with 1" weapon rail clamps or
as a compact super-bright LED flashlight. Its Luxeon III
Star LED produces a blistering 80+ Lumens of brilliant white
light equivalent to more than 40 regular LEDs. Specialized
10-degree optics produce a narrow spot beam that cuts
through fog and smoke with minimal backscatter. Dual-action
momentary tail switch eliminates cable switches that can
tangle or fail; simply mount on fore stock and slide your
hand forward slightly to lightly press on the tail for
momentary use or twist-on for constant use. Two CR123
Lithium batteries provide 4 Watts of power to the TAC4L's
Luxeon III Star LED. O-ring seals make this light waterproof
(not for scuba use). Comes with a rubber glare guard.
- Lamp: Luxeon III Star LED
- Lamp Life: 10,000+ hours
- Batteries: 2 CR123 3V Lithium
- Power: 80 Lumens
- Materials: Anodized Aluminum
and LEXAN®
- Weight: 0.50 lbs.
- Individually serial numbered
- U.S. Patent #6,168,288
|
 |
TAC2L
Computer machined from a solid bar of Aluminum,
the TAC2L is designed for use with 1" tactical rail clamps
or as a compact super-bright LED flashlight. Its Luxeon Star
LED produces a blistering 40 - 51 Lumens of brilliant white
light equivalent to more than 20 regular LEDs. Specialized
10-degree optics produce a narrow spot beam that cuts
through fog and smoke with minimal backscatter. Dual-action
momentary tail switch eliminates cable switches that can
tangle or fail; simply mount on fore stock and slide your
hand forward slightly to lightly press on the tail for
momentary use or twist-on for constant use. Two CR123
Lithium batteries provide 2 Watts of power to the TAC2L's
Luxeon Star LED. O-ring seals make this light waterproof
(not for scuba use). Comes with a rubber glare guard.
- Lamp: Luxeon Star LED
- Lamp Life: 10,000+ hours
- Batteries: 2 CR123 3V Lithium
- Power: 40- 1 Lumens
- Materials: Anodized Aluminum
and LEXAN®
- Weight: 0.50 lbs.
- Individually serial numbered
- U.S. Patent #6,168,288
|

 |
Tactical Light Holder TLH-2
This tactical light holder can be used with
Tektite and SureFire® tactical lights on any
rifle that has a Picatinny or Weaver rail. Its simple design
and installation process utilizes a push button for mounting
and adjustment so there’s no tools or gunsmithing required.
This quick-release system allows for installation of other
rail-mounted accessories. |
 |
Tactical Light Holder TLH-3
This tactical light holder can be used with the Streamlight®
Scorpion® on any rifle that has a Picatinny or
Weaver rail. Its simple design and installation process
utilizes a push button for mounting and adjustment so
there's no tools or gunsmithing required. This quick-release
system allows for installation of other rail-mounted
accessories. |



$29.65 Each |
AA Tactical Light Holder TLH-AA
This light holder can be used to attach your favorite AA to
any rifle that has a Picatinny or Weaver rail. Works with
our Trek 2, Trek 4 and Trek 30, and most other AA
flashlights including the Mini Maglite®. The
light holder’s simple design and installation process
utilizes a push button for mounting and adjustment so
there’s no tools or gunsmithing required. This quick-release
system allows for installation of other rail-mounted
accessories. |